Avaya CU360 - Cameras General field descriptions; Configuring the Avaya CU360 HD1 port

3. Click I/O Connections > Cameras > General.
4. Configure the following fields:
• Default Camera
• Camera Control by Far Site
• Bring Back to Place
5. On the web interface, click Save.
Related links
Enabling the Avaya CU360 advanced settings on page 62
Avaya CU360 camera and LED indicators on page 19
Cameras General field descriptions
Name Description
Default Camera Avaya CU360 connects the default camera through HD 1 or USB port.
To configure the Default Camera, the options are:
• HD 1: The built-in camera.
• USB: Select if you connect the Avaya video grabber to the USB port.
Camera Control by Far Site The option to control the Avaya CU360 camera from remote endpoint.
Bring Back to Place Avaya CU360 stores the camera positions when the camera is turned off
and restores this position when the camera is turned on.
Configuring the Avaya CU360 HD1 port
About this task
Configure the settings of each camera that you connect to the HD1 port of Avaya CU360.
This configuration is available only if your administrator enables the advanced settings for users.
Procedure
1. Do one of the following:
• On the endpoint main menu, click Configure.
• On the web interface, click Administrator Settings.
2. On the endpoint, click Advanced.
The default PIN for Advanced settings on the endpoint is 1234.
Cameras General field descriptions
October 2022 Installing and Administering Avaya Collaboration Unit CU360 139
Comments on this document? infodev@avaya.com