Related links
Enabling the Avaya CU360 advanced settings on page 62
Connecting additional monitor to Avaya CU360 on page 94
Monitors General field descriptions
Name Description
Number of Monitors The option to display available monitors that are connected to Avaya
CU360.
Activate the HDMI port on Avaya CU360 which connects to a monitor
through the HD1 port.
The options are:
• <auto>: Avaya CU360 automatically detects the connected monitor.
This is the default option.
Always select the Number of Monitors setting to <auto>. If you
need Avaya CU360 to work with a single monitor, do not connect the
additional monitor.
• HD1: Avaya CU360 accepts input only from the monitor connected
through the HD1 port.
• HD2: Avaya CU360 accepts input only from the additional monitor
connected through the USB-C port.
Resolution HD1 The option to define the resolution of the connected monitor through the
HD1 port.
Resolution HD2 The option to define the resolution of the connected additional monitor
through the USB-C port.
CEC – Select as Source on
Incoming Calls for endpoint
only
The option to use a video source for the monitor which is different from
the Avaya CU360 connected monitor.
For an incoming call, if you select the option to Yes, the monitor is
automatically switched to Avaya CU360 video source.
Configuring the Avaya CU360 video layouts
About this task
After you connect the single monitor or dual monitor to the Avaya CU360 endpoint, you can
configure the video layouts.
You can also change the video layout from the Avaya CU360 remote control during the meetings.
Advance administration
October 2022 Installing and Administering Avaya Collaboration Unit CU360 144
Comments on this document? infodev@avaya.com
To Next Page
Loading...
