Avaya CU360 - PIP-PaP-PoP field descriptions

Procedure
1. Do one of the following:
• On the endpoint main menu, click Configure.
• On the web interface, click Administrator Settings.
2. On the endpoint, click Advanced.
The default PIN for Advanced settings on the endpoint is 1234.
If your administrator configures a PIN to access the advanced settings on the endpoint,
Avaya CU360 prompts you to enter the PIN. After entering the PIN, Avaya CU360 displays
the Advanced window.
3. Click I/O Connections > Monitors > PIP-PaP-PoP.
4. Configure the following fields:
• MultiImage Mode
• MultiImage Type
• PIP – Position
• PIP – Rotation
• PIP – Size
5. On the web interface, click Save.
Related links
Enabling the Avaya CU360 advanced settings on page 62
PIP-PaP-PoP field descriptions
Name
Description
MultiImage Mode The option to enable or disable PIP, PaP, or PoP video layouts,
depending on the number of video streams available on the monitor.
The options are:
• <auto>: Enables PiP, PaP, or PoP automatically when the number of
video streams is greater than the number of available monitors.
The order of the video streams is set automatically with precedence to
the presentation video streams.
• Off: Always disables PIP, PaP, or PoP.
• On: Always enables PiP, PaP or PoP with two video streams.
Table continues…
PIP-PaP-PoP field descriptions
October 2022 Installing and Administering Avaya Collaboration Unit CU360 145
Comments on this document? infodev@avaya.com