Avaya CU360 - Use IPv6 addresses field descriptions

If your administrator configures a PIN to access the advanced settings on the endpoint,
Avaya CU360 prompts you to enter the PIN. After entering the PIN, Avaya CU360 displays
the Advanced window.
3. Click Networks > Preferences > General.
• On the endpoint menu, Avaya CU360 displays the General window.
• On the web interface menu, Avaya CU360 displays the Networks - Preferences window.
4. Click Use IPv6.
5. Select Yes to enable the IPv6 support.
6. Configure the following fields:
• H.323 Preferred IP Signaling
• SIP Preferred IP Signaling
• SIP ANAT
• SIP ANAT Preferred IP Media
7. On the web interface, click Save.
Related links
Enabling the Avaya CU360 advanced settings on page 62
Use IPv6 addresses field descriptions
Name
Description
H.323 Preferred IP Signaling The option to define the preferred IP version for
signaling in the H.323-based calls.
You can configure this field only if :
• You enable Use IPv6 to Yes.
• The destination IP address is an FQDN.
The preferred IP version for signaling are:
• Automatic
• IPv4
• IPv6
The default value for JITC Mode is IPv4.
Table continues…
Advance administration
October 2022 Installing and Administering Avaya Collaboration Unit CU360 148
Comments on this document? infodev@avaya.com