Procedure
1. Do one of the following:
• On the endpoint main menu, click Configure.
• On the web interface, click Administrator Settings.
2. On the endpoint, click Advanced.
The default PIN for Advanced settings on the endpoint is 1234.
If your administrator configures a PIN to access the advanced settings on the endpoint,
Avaya CU360 prompts you to enter the PIN. After entering the PIN, Avaya CU360 displays
the Advanced window.
3. Click Networks > GLAN > IPv4 Addresses.
• On the endpoint menu, Avaya CU360 displays the IPv4 Addresses window.
• On the web interface menu, Avaya CU360 displays the GLAN window.
4. Configure the following fields:
• IP Address Mode
• IP Address
• Subnet Mask
• Gateway
• DNS
5. On the web interface, click Save.
Related links
Enabling the Avaya CU360 advanced settings on page 62
IPv4 Addresses field descriptions
Name
Description
IP Address Mode The option to determine whether the IP address
is allocated dynamically using stateless address
autoconfiguration (SLAAC) or designated a static IP
address.
The options are:
• Automatic
• Manual
The default IP Address Mode is Automatic.
Table continues…
Advance administration
October 2022 Installing and Administering Avaya Collaboration Unit CU360 150
Comments on this document? infodev@avaya.com
To Next Page
Loading...
