Avaya CU360 - Configuring bandwidth threshold for LAN in Avaya CU360

• On the web interface, click Administrator Settings.
2. On the endpoint, click Advanced.
The default PIN for Advanced settings on the endpoint is 1234.
If your administrator configures a PIN to access the advanced settings on the endpoint,
Avaya CU360 prompts you to enter the PIN. After entering the PIN, Avaya CU360 displays
the
Advanced window.
3. Click Networks > Preferences > General > Priority.
4. Click one of the following:
• GLAN: To use the LAN as preferred network.
• Wi-Fi: To use the Wi-Fi as preferred network.
5. On the web interface, click Save.
Related links
Enabling the Avaya CU360 advanced settings on page 62
Configuring bandwidth threshold for LAN in Avaya CU360
About this task
This configuration is available only if your administrator enables the advanced settings for users.
Procedure
1. Do one of the following:
• On the endpoint main menu, click Configure.
• On the web interface, click Administrator Settings.
2. On the endpoint, click Advanced.
The default PIN for Advanced settings on the endpoint is 1234.
If your administrator configures a PIN to access the advanced settings on the endpoint,
Avaya CU360 prompts you to enter the PIN. After entering the PIN, Avaya CU360 displays
the Advanced window.
3. Click Networks > GLAN > Bandwidth.
4. Select Yes for Enable the bandwidth limit.
5. Configure the following fields:
• Max. Bandwidth Rx (KB): The incoming bandwidth limit.
• Max. Bandwidth Tx (KB): The outgoing bandwidth limit.
6. On the web interface, click Save.
Advance administration
October 2022 Installing and Administering Avaya Collaboration Unit CU360 154
Comments on this document? infodev@avaya.com