Related links
Enabling the Avaya CU360 advanced settings on page 62
Configuring bandwidth threshold for Wi-Fi in Avaya CU360
About this task
This configuration is available only if your administrator enables the advanced settings for users.
Procedure
1. Do one of the following:
• On the endpoint main menu, click Configure.
• On the web interface, click Administrator Settings.
2. On the endpoint, click Advanced.
The default PIN for Advanced settings on the endpoint is 1234.
If your administrator configures a PIN to access the advanced settings on the endpoint,
Avaya CU360 prompts you to enter the PIN. After entering the PIN, Avaya CU360 displays
the Advanced window.
3. Click Networks > Wi-Fi > Bandwidth.
4. Select Yes for Enable the bandwidth limit.
5. Configure the following fields:
• Max. Bandwidth Rx (KB): The incoming bandwidth limit.
• Max. Bandwidth Tx (KB): The outgoing bandwidth limit.
6. On the web interface, click Save.
Related links
Enabling the Avaya CU360 advanced settings on page 62
Configuring advanced LAN connectivity in Avaya CU360
About this task
Configure advanced properties of the network connections in each network port which include the
network speed and packet size.
Before you begin
Enable the Avaya CU360 advanced settings and Avaya CU360 network priority.
Configuring bandwidth threshold for Wi-Fi in Avaya CU360
October 2022 Installing and Administering Avaya Collaboration Unit CU360 155
Comments on this document? infodev@avaya.com
To Next Page
Loading...
