Avaya CU360 - GLAN Parameters field descriptions

Procedure
1. Do one of the following:
• On the endpoint main menu, click Configure.
• On the web interface, click Administrator Settings.
2. On the endpoint, click Advanced.
The default PIN for Advanced settings on the endpoint is 1234.
If your administrator configures a PIN to access the advanced settings on the endpoint,
Avaya CU360 prompts you to enter the PIN. After entering the PIN, Avaya CU360 displays
the Advanced window.
3. Click Networks > GLAN > Parameters.
4. Configure the following fields:
• MTU
• Speed\Duplex Mode
• Speed
• Duplex Mode
5. On the web interface, click Save.
Related links
Enabling the Avaya CU360 advanced settings on page 62
Configuring network priority settings in Avaya CU360 on page 153
GLAN Parameters field descriptions
Name
Description
MTU The maximum size of data packets sent around the network.
The default MTU size is 1360.
If you transmit data packet of a larger MTU size, the network drops or
fragments the packet. To avoid packet loss or fragmentation, all network
components must use the same MTU size.
For IPv4 address, set the MTU size in the range of 576 through 1500.
For IPv6 address, set the MTU size in the range of 1280 through 1500.
Table continues…
Advance administration
October 2022 Installing and Administering Avaya Collaboration Unit CU360 156
Comments on this document? infodev@avaya.com