Avaya CU360 - Configuring advanced Wi-Fi network connectivity in Avaya CU360

Name Description
Speed\Duplex Mode The option to select the speed of the network port that defines the data
transmission speed in the network.
The options are:
• Automatic: Avaya CU360 selects the speed and duplex mode
automatically. This is the default option.
• Auto - up to 100/Full: Semi-automatic mode with a specified maximum
speed and data transmission.
• Auto - up to 100/Half: Semi-automatic mode with a specified maximum
speed and data transmission.
• Auto - up to 10/Full: Semi-automatic mode with a specified maximum
speed and data transmission.
• Auto - up to 10/Half: Semi-automatic mode with a specified maximum
speed and data transmission.
• Manual: Configure the speed and duplex mode manually for the
network.
Speed The speed of the network port.
The options are:
• 10 Mbps
• 100 Mbps
Duplex Mode The data transmission mode that is defined for the network router or
switch.
The options are:
• Half: The half duplex mode provides communication in both directions,
but only in one direction at a time.
• Full: The full duplex mode provides communication in both directions
simultaneously.
Configuring advanced Wi-Fi network connectivity in Avaya
CU360
Before you begin
Enable the Avaya CU360 advanced settings and Avaya CU360 network priority.
Procedure
1. Do one of the following:
• On the endpoint main menu, click Configure.
Configuring advanced Wi-Fi network connectivity in Avaya CU360
October 2022 Installing and Administering Avaya Collaboration Unit CU360 157
Comments on this document? infodev@avaya.com