• On the web interface, click Administrator Settings.
2. On the endpoint, click Advanced.
The default PIN for Advanced settings on the endpoint is 1234.
If your administrator configures a PIN to access the advanced settings on the endpoint,
Avaya CU360 prompts you to enter the PIN. After entering the PIN, Avaya CU360 displays
the
Advanced window.
3. Click Networks > Wi-Fi > Parameters.
4. Configure MTU.
5. On the web interface, click Save.
Related links
Enabling the Avaya CU360 advanced settings on page 62
Configuring network priority settings in Avaya CU360 on page 153
Wi-Fi Parameters field descriptions
Name
Description
MTU The maximum size of data packets sent around the network.
The default MTU size is 1360.
If you transmit data packet of a larger MTU size, the network drops or
fragments the packet. To avoid packet loss or fragmentation, all network
components must use the same MTU size.
For IPv4 address, set the MTU size in the range of 576 through 1500.
For IPv6 address, set the MTU size in the range of 1280 through 1500.
Configuring the
Avaya CU360 port ranges
About this task
You can configure the base port to any value between 1024 and 65535.
This configuration is available only if your administrator enables the advanced settings for users.
Procedure
1. Do one of the following:
• On the endpoint main menu, click Configure.
• On the web interface, click Administrator Settings.
Advance administration
October 2022 Installing and Administering Avaya Collaboration Unit CU360 158
Comments on this document? infodev@avaya.com
To Next Page
Loading...
