2. On the endpoint, click Advanced.
The default PIN for Advanced settings on the endpoint is 1234.
If your administrator configures a PIN to access the advanced settings on the endpoint,
Avaya CU360 prompts you to enter the PIN. After entering the PIN, Avaya CU360 displays
the Advanced window.
3. Click Networks > Preferences > Dynamic Ports.
4. Configure the following fields:
TCP UDP BFCP UDP
Automatic Automatic Automatic
Ports Ports Ports
If you select No in the Automatic field, you should manually configure the TCP, UDP, or
BFCP UDP base ports in
Ports.
5. On the web interface, click Save.
Related links
Enabling the Avaya CU360 advanced settings on page 62
Configuring NAT and firewall in Avaya CU360
About this task
Configure a NAT router and firewall for Avaya CU360.
This configuration is available only if your administrator enables the advanced settings for users.
Before you begin
Configure the Avaya CU360 port ranges.
Procedure
1. Do one of the following:
• On the endpoint main menu, click Configure.
• On the web interface, click Administrator Settings.
2. On the endpoint, click Advanced.
The default PIN for Advanced settings on the endpoint is 1234.
If your administrator configures a PIN to access the advanced settings on the endpoint,
Avaya CU360 prompts you to enter the PIN. After entering the PIN, Avaya CU360 displays
the Advanced window.
3. Click Networks > Preferences > NAT.
Configuring NAT and firewall in Avaya CU360
October 2022 Installing and Administering Avaya Collaboration Unit CU360 159
Comments on this document? infodev@avaya.com
To Next Page
Loading...
