4. Configure the following fields:
• NAT Traversal
• NAT Discovery
• Public IP Address:
This option is available when you select Manual.
• Server:
This option is available when you select STUN autodiscovery.
• Port:
This option is available when you select STUN autodiscovery.
• Pinhole Refresh Time (sec.)
• Pinhole Keepalive
5. On the web interface, click Save.
Related links
Enabling the Avaya CU360 advanced settings on page 62
Configuring the Avaya CU360 port ranges on page 158
NAT field descriptions
Name
Description
NAT Traversal The option to enable a NAT router and firewall for Avaya CU360.
Configure the Avaya CU360 port ranges.
Select No if Avaya CU360 has a public IP address.
NAT Discovery The options to discover the public IP address of Avaya CU360.
The options are:
• Manual: Enter the public IP address manually in Public IP Address.
• HTTP autodiscovery: Uses a public HTTP server to get the Avaya
CU360 public IP address.
• STUN autodiscovery: Uses a public STUN server to get the Avaya
CU360 public IP address. If you select this option, enter the server
name and port number of the STUN server in the
Server and Port
fields respectively.
Pinhole Refresh Time (sec.) The number of seconds to open a pinhole through the firewall.
Pinhole Keepalive The connection is kept open by sending periodic pings to the remote
control unit.
Advance administration
October 2022 Installing and Administering Avaya Collaboration Unit CU360 160
Comments on this document? infodev@avaya.com
To Next Page
Loading...
