Name Description
Quality of Service The option to select network priorities.
Network components such as routers or switches use the following two
methods to implement QoS settings:
• Precedence/TOS:
• DiffServ.
Precedence/TOS The option to define network components as a designated type of service
(TOS) and an assign precedence ranking for each type of data.
DiffServ. The option to define priority values for network components and different
data types.
Registering
Avaya CU360 with SIP servers
About this task
Register Avaya CU360 endpoints with SIP servers to maintain the mapping list of names or
numbers and successfully establish call routes.
This configuration is available only if your administrator enables the advanced settings for users.
Before you begin
Verify the following information about your SIP environment:
• The DNS name or IP address of the SIP server. You can define up to three servers.
• The transport protocol and port used in your SIP environment.
• For the SIP infrastructure that requires a SIP user authentication, the credentials for
authenticating Avaya CU360 with the SIP server.
• The model of the SIP server.
Procedure
1. Do one of the following:
• On the endpoint main menu, click Configure.
• On the web interface, click Administrator Settings.
2. On the endpoint, click Advanced.
The default PIN for Advanced settings on the endpoint is 1234.
If your administrator configures a PIN to access the advanced settings on the endpoint,
Avaya CU360 prompts you to enter the PIN. After entering the PIN, Avaya CU360 displays
the Advanced window.
3. Click Protocols > SIP.
Advance administration
October 2022 Installing and Administering Avaya Collaboration Unit CU360 162
Comments on this document? infodev@avaya.com
To Next Page
Loading...
