Avaya CU360 - SIP field descriptions

4. Configure the following fields:
• User
• Authentication Name
• Authentication Password
• Use Server 1
• Server 1 DNS Name
• Use Server 2
• Server 2 DNS Name
• Use Server 3
• Server 3 DNS Name
• Server Model
5. On the web interface, click Save.
Related links
Enabling the Avaya CU360 advanced settings on page 62
SIP field descriptions
Name
Description
User The system name or number.
You register Avaya CU360 with SIP servers using this name or number.
Authentication Name The name for authenticating Avaya CU360 with SIP servers.
Authentication Password The password for authenticating Avaya CU360 with SIP servers.
Use Server 1
Use Server 2 (Optional)
Use Server 3 (Optional)
The SIP servers to which Avaya CU360 registers for calls.
For redundant SIP deployments, you can enter information for maximum
three SIP servers.
• Avaya CU360 uses the Server 1 as the default SIP server.
• If the Server 1 fails, Avaya CU360 uses the Server 2 and Server 3.
Server 1 DNS Name
Server 2 DNS Name
(Optional)
Server 3 DNS Name
(Optional)
The DNS name or IP address of each SIP server.
Server Model Change the model of the SIP server to solve interoperability issues. If you
are not sure or it is not listed, select Auto.
SIP field descriptions
October 2022 Installing and Administering Avaya Collaboration Unit CU360 163
Comments on this document? infodev@avaya.com