EasyManua.ls Logo

Avaya CU360 - Configuring the presence status of Avaya CU360 users

Avaya CU360
235 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Name Description
Use TLS The option to configure Avaya CU360 to enable the TLS functionality.
Verify Certificate The option to configure Avaya CU360 to use only TLS to connect to other
devices. These devices must have security certificates that Avaya CU360
can verify.
Certificate Hostname
Validation
The option to configure the host name validation level.
Accept Validated Only: Avaya CU360 only processes security
certificates with validates host names. This is the default policy for
certificate host name and key use validation.
Accept Validated or same default certificate: Avaya CU360
processes certificates that are validated or are the same as the
certificates that Avaya CU360 uses.
Accept All: Avaya CU360 processes all security certificates and does
not validate host names.
Verify Certificate Key Usage The option to configure the certificate key use level.
If you enable this option, Avaya CU360 processes only certificates that
contain values for the key use parameters — Key Usage or Extended
Key Usage.
Verify Certificate
Revocation
The option to configure Avaya CU360 to verify security certificate
revocation.
Yes always: Avaya CU360 checks all certificates for revocation. Avaya
CU360 rejects certificates for which it cannot verify revocation.
Yes if possible: Avaya CU360 checks all certificates for revocation.
Avaya CU360 rejects revoked certificates, but processes certificates for
which it cannot verify revocation.
No: Avaya CU360 does not check certificates for revocation.
Configuring the presence status of Avaya CU360 users
About this task
Register Avaya CU360 to an XMPP server to publish its presence status and view the presence
status of other contacts such as other Avaya CU360 and devices registered to the presence
server.
This configuration is available only if your administrator enables the advanced settings for users.
Procedure
1. Do one of the following:
On the endpoint main menu, click Configure.
On the web interface, click Administrator Settings.
Configuring the presence status of Avaya CU360 users
October 2022 Installing and Administering Avaya Collaboration Unit CU360 165
Comments on this document? infodev@avaya.com

Table of Contents

Other manuals for Avaya CU360

Related product manuals