Procedure
1. Do one of the following:
• On the endpoint main menu, click Configure.
• On the web interface, click Administrator Settings.
2. On the endpoint, click Advanced.
The default PIN for Advanced settings on the endpoint is 1234.
If your administrator configures a PIN to access the advanced settings on the endpoint,
Avaya CU360 prompts you to enter the PIN. After entering the PIN, Avaya CU360 displays
the Advanced window.
3. Click Protocols > General > Reject SIP calls.
4. Select one of the following options in the Reject SIP calls field:
• No
• GLAN & Wi-Fi
• GLAN
• Wi-Fi
5. On the web interface, click Save.
Related links
Enabling the Avaya CU360 advanced settings on page 62
Disabling H.323–based calls in Avaya CU360
About this task
Configure Avaya CU360 to disable H.323-based calls on GLAN, Wi-Fi, or both network interfaces.
This configuration is available only if your administrator enables the advanced settings for users.
Procedure
1. Do one of the following:
• On the endpoint main menu, click Configure.
• On the web interface, click Administrator Settings.
2. On the endpoint, click Advanced.
The default PIN for Advanced settings on the endpoint is 1234.
If your administrator configures a PIN to access the advanced settings on the endpoint,
Avaya CU360 prompts you to enter the PIN. After entering the PIN, Avaya CU360 displays
the Advanced window.
Advance administration
October 2022 Installing and Administering Avaya Collaboration Unit CU360 168
Comments on this document? infodev@avaya.com
To Next Page
Loading...
