• Disable TLS 1.0/1.1
5. On the web interface, click Save.
Related links
Enabling the Avaya CU360 advanced settings on page 62
Web field descriptions
Name Description
Web Management The option to enable remote access to Avaya CU360 using the web
interface.
Enable All Addresses The option to allow remote access to Avaya CU360 using all IP
addresses or restrict remote access to a specific range of IP addresses.
The options are:
• Yes: Enables remote access from any IP address.
• No: Restricts remote access to a specific range of IP addresses. You
can define the range of IP addresses in
Address and Subnet Mask.
Address The IP addresses of the devices that you allow to gain access Avaya
CU360 remotely through the web interface.
You can enter a value in this field only if you configure Enable All
Addresses to No.
Subnet Mask The range of addresses that you allow to gain access Avaya CU360
remotely through the web interface.
You can enter a value in this field only if you configure Enable All
Addresses to No.
Basic Access
Authentication
The option to configure the webserver to automatically accept username
and password for login. The option allows inserting the username and
password in HTTPS URLs.
You can save bookmarks to your favorite Avaya CU360 endpoint and log
in every time without entering the username and password configured for
the web access in the URL:
https://username:password@xxx.xxx.xxx.xxx/web/basicauth/
basicauth.php
User Name The user name for the remote web access.
The default user name is Admin.
Password The password for the remote web access.
The default password is 1234.
Table continues…
Advance administration
October 2022 Installing and Administering Avaya Collaboration Unit CU360 172
Comments on this document? infodev@avaya.com
To Next Page
Loading...
