Avaya CU360 - Configuring the Avaya CU360 web-video

Name Description
Disconnection due to
inactivity
The duration after which the web interface disconnects inactive users.
The options are:
• Never
• 5 minutes
• 10 minutes
• 15 minutes
• 30 minutes
Enable Login Attempts The option to block users after five consecutive incorrect login attempts
within a ten-minute time span.
Avaya CU360 blocks users for the duration specified in Login Denied
Time. Avaya CU360 displays a message inviting the user to retry later.
Login Denied Time The period during which Avaya CU360 blocks users from logging in to the
web interface.
The options are:
• 30 minutes
• 1 hour
• 2 hours
• 4 hours
Disable TLS 1.0/1.1 The option to enable or disable the TLS 1.0 and TLS 1.1 protocol.
Configuring the Avaya CU360 web-video
About this task
Use the web-video feature to define the video refresh rate and zoom. With this feature, you can
take video snapshots and save the snapshots to your computer.
You can monitor local and remote video from the Avaya CU360 web interface.
You cannot change Web Video settings using the web interface.
This configuration is available only if your administrator enables the advanced settings for users.
This configuration is available only on the Avaya CU360 endpoint.
Procedure
1. On the endpoint main menu, click Configure.
2. On the endpoint, click Advanced.
The default PIN for Advanced settings on the endpoint is 1234.
Configuring the Avaya CU360 web-video
October 2022 Installing and Administering Avaya Collaboration Unit CU360 173
Comments on this document? infodev@avaya.com