Download field descriptions
Name Description
Download Management The option to enable or disable remote upgrade to Avaya CU360.
Enable All Addresses The option to allow remote upgrade of Avaya CU360 using all IP
addresses or restrict remote upgrade to a specific range of IP addresses.
The options are:
• Yes: Enables remote upgrade from any IP address.
• No: Restricts remote upgrade to a specific range of IP addresses. You
can define the range of IP addresses in
Address and Subnet Mask.
Address The IP addresses of the devices that you allow to make the upgrade.
You can enter a value in this field only if you configure Enable All
Addresses to No.
Subnet Mask The range of addresses that you allow to make the upgrade.
You can enter a value in this field only if you configure Enable All
Addresses to No.
Password Protect The option to configure Avaya CU360 to add password protection.
Password The password for remote upgrade.
Verify Signature The option to enable or disable the signature verification.
OTA Update Enable The option to enable or disable remote access to the Over the Air
upgrade information on the public internet, and to alert users that a new
software version is available to upgrade Avaya CU360.
Controlling Avaya CU360 with AT commands
About this task
You can use AT commands to control the functions of Avaya CU360 on the endpoint and web
interface.
Avaya CU360 can receive AT commands from:
• The device network connection to the controller's IP address through the 55003 port.
• The device USB connection to the controller's serial port through a standard RS232 cable.
This configuration is available only if your administrator enables the advanced settings for users.
Procedure
1. Do one of the following:
• On the endpoint main menu, click Configure.
• On the web interface, click Administrator Settings.
Advance administration
October 2022 Installing and Administering Avaya Collaboration Unit CU360 178
Comments on this document? infodev@avaya.com
To Next Page
Loading...
