Avaya CU360 - AT Commands field descriptions

2. On the endpoint, click Advanced.
The default PIN for Advanced settings on the endpoint is 1234.
If your administrator configures a PIN to access the advanced settings on the endpoint,
Avaya CU360 prompts you to enter the PIN. After entering the PIN, Avaya CU360 displays
the Advanced window.
3. Click Utilities > Remote Access > AT Commands.
4. Click one of the following in the AT Commands Management field.
• No: Disables the remote access to Avaya CU360 using AT commands through the TCP,
SSH and RS232 serial port.
• IP only: Restricts the remote access to Avaya CU360 using AT commands to only the
TCP connection.
5. Configure the following fields:
IP SSH RS232 Serial Port
Enable All Addresses Enabled Always Initialized
Address User Name Baud Rate
Subnet Mask Password —
6. On the web interface, click Save.
Related links
Enabling the Avaya CU360 advanced settings on page 62
AT Commands field descriptions
AT Commands section
Name
Description
AT Commands Management The option to enable or disable remote access to Avaya CU360 using AT
commands through the TCP, SSH and RS232 serial ports.
The options are:
• No: Disables the remote access to Avaya CU360 using AT commands
through the TCP, SSH and RS232 serial port.
• IP only: Restricts the remote access to Avaya CU360 using AT
commands to only the TCP connection.
AT Commands field descriptions
October 2022 Installing and Administering Avaya Collaboration Unit CU360 179
Comments on this document? infodev@avaya.com