Configuring telnet in Avaya CU360
About this task
With telnet, you can control Avaya CU360 by using CLI commands.
This configuration is available only if your administrator enables the advanced settings for users.
Procedure
1. Do one of the following:
• On the endpoint main menu, click Configure.
• On the web interface, click Administrator Settings.
2. On the endpoint, click Advanced.
The default PIN for Advanced settings on the endpoint is 1234.
If your administrator configures a PIN to access the advanced settings on the endpoint,
Avaya CU360 prompts you to enter the PIN. After entering the PIN, Avaya CU360 displays
the Advanced window.
3. Click Utilities > Remote Access > Telnet.
4. Configure the following fields:
• Telnet Management
• Enable All Addresses
• Address
• Subnet Mask
• Password
5. On the web interface, click Save.
Related links
Enabling the Avaya CU360 advanced settings on page 62
Telnet field descriptions
Name
Description
Telnet Management The option to enable or disable remote access to Avaya CU360 through
the telnet.
Table continues…
Configuring telnet in Avaya CU360
October 2022 Installing and Administering Avaya Collaboration Unit CU360 181
Comments on this document? infodev@avaya.com
To Next Page
Loading...
