Avaya CU360 - Managing Avaya CU360 from Avaya Meetings Management

Name Description
Enable All Addresses The option to allow remote access through telnet to Avaya CU360 using
all IP addresses or restrict the remote access to a specific range of IP
addresses.
The options are:
• Yes: Enables remote access through telnet from all IP addresses.
• No: Restricts remote access through telnet to a specific range of IP
addresses. You can define the range of IP addresses in Address and
Subnet Mask.
Address The IP addresses of the devices that you allow to gain access Avaya
CU360 remotely through the telnet.
You can enter a value in this field only if you configure Enable All
Addresses to No.
Subnet Mask The range of addresses that you allow to gain access Avaya CU360
remotely through the telnet.
You can enter a value in this field only if you configure Enable All
Addresses to No.
Password The password for the telnet access.
Managing Avaya CU360 from Avaya Meetings Management
About this task
With Avaya Meetings Management, you can manage all the endpoints, including Avaya CU360 in
a video network.
You must enable AT commands to work with Avaya Meetings Management. You can select the
cloud mode to manage Avaya CU360.
This configuration is available only if your administrator enables the advanced settings for users.
Procedure
1. Do one of the following:
• On the endpoint main menu, click Configure.
• On the web interface, click Administrator Settings.
2. On the endpoint, click Advanced.
The default PIN for Advanced settings on the endpoint is 1234.
If your administrator configures a PIN to access the advanced settings on the endpoint,
Avaya CU360 prompts you to enter the PIN. After entering the PIN, Avaya CU360 displays
the Advanced window.
3. Click Utilities > Remote Access > Equinox Management.
Advance administration
October 2022 Installing and Administering Avaya Collaboration Unit CU360 182
Comments on this document? infodev@avaya.com