4. Click Call.
Configuring Avaya Spaces integration in the Avaya CU360
application
About this task
You can disable Avaya Spaces integration or change the default Avaya Spaces domain address
(only if you are using a test or internal solution). Avaya CU360 endpoint can accept invitations and
calls only in the same cloud domain as specified in the configuration.
Procedure
1. Do one of the following:
• On the endpoint main menu, click Configure.
• On the web interface, click Administrator Settings.
On the endpoint menu, Avaya CU360 displays the Configure window.
2. On the endpoint, click Advanced.
The default PIN for Advanced settings on the endpoint is 1234.
If your administrator configures a PIN to access the advanced settings on the endpoint,
Avaya CU360 prompts you to enter the PIN. After entering the PIN, Avaya CU360 displays
the
Advanced window.
3. Click Avaya Spaces.
4. Select Yes to enable Avaya Spaces integration.
5. Configure the following fields:
• URL: Enter the Avaya Spaces domain. By default, the integration with Avaya Spaces is
enabled for the official domain: https://spaces.avayacloud.com.
• Use with Spaces account: Select No for Room Device. Select Yes for your Personal
Device.
• AI Noise Removal: By default, AI Noise Removal is disabled when using the Avaya
CU360 application (Room device). This is because the performance of the Avaya
Spaces AI Noise Removal is optimized for microphones that are placed very close to the
speaker.
• Predefined Party: You can enable this to configure a specific Avaya Spaces URL as a
predefined party. After you configure the predefined party, the Call key on the remote
control or on the UX or web interface automatically joins this Avaya Spaces URL.
6. On the web interface, click Save.
Working with Avaya CU360 for Avaya Spaces as a Room Device
October 2022 Installing and Administering Avaya Collaboration Unit CU360 191
Comments on this document? infodev@avaya.com
To Next Page
Loading...
