Automating password insertion when dialing into an Avaya
Spaces URL
About this task
You can automate password insertion, when you dial to a meeting manually or through a saved
contact or a predefined party URL.
Before you begin
Ensure that you have an account on Avaya Spaces.
Procedure
If the password of your Avaya Spaces is 123456, prefix a “?” or “&” to the password at the end of
the URL.
• The Prefix “?”, for example, https://spaces.avayacloud.com/spaces/5e......e69?pwd=123456.
• The Prefix “&”, for example, https://spaces.avayacloud.com/spaces/5e......e69&pwd=123456.
Avaya Spaces supports the password-embedded link for
meetings
The Avaya CU360 application supports meetings with password-embedded links.
If an Avaya Spaces URL that you are using to make a manual call or saved favorite contact or
predefined Avaya Spaces URL or received as a calendar invite contains an embedded password,
you can join the meeting through the Avaya CU360 application using the embedded password.
Otherwise, the
Avaya CU360 application requires that you enter the password manually when
joining.
The Avaya CU360 application does not require a password when you join a password-protected
meeting through a QR code or a Verification Code, or when invited by an Avaya Spaces Mobile
application or a web client.
Configuring the advanced system names in Avaya CU360
Procedure
1. Do one of the following:
• On the endpoint main menu, click Configure.
• On the web interface, click Administrator Settings.
2. On the endpoint, click Advanced.
The default PIN for Advanced settings on the endpoint is 1234.
If your administrator configures a PIN to access the advanced settings on the endpoint,
Avaya CU360 prompts you to enter the PIN. After entering the PIN, Avaya CU360 displays
the Advanced window.
3. Click System > Location.
Using Avaya CU360 with Avaya Spaces
October 2022 Installing and Administering Avaya Collaboration Unit CU360 192
Comments on this document? infodev@avaya.com
To Next Page
Loading...
