If you need a USB cable longer than 2.7 meters (8.8 ft), use an active USB booster extension
cable to connect the Avaya CU360 endpoint. Do not use a USB cable suitable only for
charging the Avaya CU360 endpoint.
• Avaya CU360 does not support any additional USB camera if the USB bar mode is active.
• Use the default Apple Thunderbolt cable for macOS devices. The Avaya CU360 endpoint
does not detect the Apple Thunderbolt cable, reconnect the cable and configure the Always
Active mode.
• In the Always Active mode, the Avaya CU360 works as a gadget when connected to
the USB-C port of the computer. For this reason, when you use the Type-C USB cable,
configures
Avaya CU360 in Always Active mode.
USB Bar Mode Computer or Laptop
port
Avaya CU360
declaration to
computer
Result
Always Active USB Type-A or USB
Type-C
Avaya CU360 works as
a gadget
Gadget: Computer
detected
Manual USB Type-A Avaya CU360 works as
a gadget
Gadget: Computer
detected
Manual USB Type-C Avaya CU360 works as
a host or gadget
• Host: Computer not
detected
Unplug and retry
• Gadget: Computer
detected
Related links
Avaya USB AV bar on page 30
Testing acoustic pairing in Avaya CU360
About this task
Test acoustic pairing between Avaya CU360 and other devices to check for interference from
ambient noises.
Procedure
1. Do one of the following:
• On the endpoint main menu, click Configure > System Status > Diagnostics > I/O
Connections > Audio > Tests.
• On the web interface, click Diagnostics > I/O Connections > Audio > Tests.
2. Click the Play button next to one of the following tests:
• Local Tone: The audio input that Avaya CU360 receives.
Testing acoustic pairing in Avaya CU360
October 2022 Installing and Administering Avaya Collaboration Unit CU360 211
Comments on this document? infodev@avaya.com
To Next Page
Loading...
