• Tx Tone: The audio output sent that Avaya CU360 sends.
Testing the monitor image of Avaya CU360
About this task
Test the monitor image of Avaya CU360 to check for the optimization of the aspect ratio and color
rendering of the monitor display.
You can use the test image to finely tune monitor colors and aspect ratio using the remote control
of the monitor provided by the vendor.
Procedure
1. Click Configure > System Status > Diagnostics > I/O Connections > Monitor > Tests.
2. Click the Play button to generate the test image.
Verifying the status of the equipment connected to Avaya
CU360
About this task
Check the status of the external monitor and other equipment connected to Avaya CU360, such
as Avaya AV Grabber and Avaya USB cameras.
Procedure
Do one of the following:
• On the endpoint main menu, click Configure > System Status > Diagnostics > I/O
Connections > Status.
• On the web interface, click Diagnostics > I/O Connections > Status.
Result
Avaya CU360 displays the status of the connected equipment.
Retrieving the Avaya CU360 logs
When reporting a problem to customer support, you need to retrieve and send logs of Avaya
CU360. Avaya CU360 logs are the following:
• Logs for analyzing network traffic.
Troubleshooting
October 2022 Installing and Administering Avaya Collaboration Unit CU360 212
Comments on this document? infodev@avaya.com
To Next Page
Loading...
