Enabling the Avaya CU360 remote initialization
About this task
Use Avaya Meetings Management to restore and take a backup of the Avaya CU360 endpoint
remotely. You can use configuration files to duplicate the same settings across multiple
Avaya
CU360 endpoints in an organization.
Enable Avaya Meetings Management to retrieve or apply configuration files remotely.
Before you begin
This configuration is available only if your administrator enables the advanced settings for users.
Procedure
1. Do one of the following:
• On the endpoint main menu, click Configure.
• On the web interface, click Administrator Settings.
2. On the endpoint, click Advanced.
The default PIN for Advanced settings on the endpoint is 1234.
If your administrator configures a PIN to access the advanced settings on the endpoint,
Avaya CU360 prompts you to enter the PIN. After entering the PIN, Avaya CU360 displays
the Advanced window.
3. Click Utilities > Remote Access > NetLog.
4. Configure the following fields:
• Enabled
• User Name
• Password
• FTP Enabled
5. On the web interface, click Save.
Avaya CU360 remote initialization field descriptions
Name
Description
Enabled Enables the functionality to create a net log. The net log provides a trace
of the Avaya CU360 network status and traffic when you act or during a
call. You can start the trace log from the Avaya CU360 web interface.
User Name The username of the web interface. Use the username to retrieve the log
from the web interface.
Password The password of the web interface. Use the password to retrieve the log
from the web interface.
FTP Enabled When a customer service representative configures FTP Enabled from a
command-line console, the log files are exported to a remote FTP server.
Troubleshooting
October 2022 Installing and Administering Avaya Collaboration Unit CU360 214
Comments on this document? infodev@avaya.com
To Next Page
Loading...
