Verifying the Avaya CU360 camera for video conference
About this task
Verify the Avaya CU360 camera before the video conference for better video resolution.
Before you begin
Ensure that you remove the protective cover of the camera and disable the camera privacy option.
Ensure the network connection to the remote Avaya CU360 endpoint has enough bandwidth. Low
bandwidth conditions result in a reduction of resolution at the
Avaya CU360 endpoint.
Enable the control camera option to operate the Avaya CU360 camera from a remote location.
Procedure
1. Do one of the following:
• On the endpoint main menu, click Configure.
• On the web interface, click Administrator Settings.
2. On the endpoint, click Advanced.
The default PIN for Advanced settings on the endpoint is 1234.
If your administrator configures a PIN to access the advanced settings on the endpoint,
Avaya CU360 prompts you to enter the PIN. After entering the PIN, Avaya CU360 displays
the Advanced window.
3. Click Calls > Preferences > Video.
4. Select Yes to enable the HD 1080 option.
5. On the web interface, click Save.
Verifying the video in the Avaya CU360 meetings
About this task
Check the Avaya CU360 video if users do not send or receive video files during the meeting.
Before you begin
Enable the web video option to view the video remotely from the Avaya CU360 web interface.
Ensure that you disable the privacy mode to send any video during the meeting.
Procedure
1. Do one of the following:
• On the endpoint main menu, click Configure.
• On the web interface, click Administrator Settings.
Verifying the Avaya CU360 camera for video conference
October 2022 Installing and Administering Avaya Collaboration Unit CU360 219
Comments on this document? infodev@avaya.com
To Next Page
Loading...
