Avaya CU360 - Page 28

After Pexip Provisioning, use Avaya CU360 as follows:
• Avaya CU360 is SIP registered to the Pexip SIP Cloud Service
• Use Avaya CU360 for SIP-based calls
• Avaya CU360 automatically receives the list of contacts from the Pexip Cloud service
When Avaya CU360 is provisioned, even if the automatic synchronization is disabled, you cannot
change or edit the following options:
• System Name Unicode
• Enable Encryption
• SIP
- User
- Authentication Name
- Authentication Password
- Use Server 1
- Server 1 DNS Name
- Use Server 2
- Server 2 DNS Name
- Use Server 3
- Server 3 DNS Name
- Server Model
• Advanced > SIP:
- Transport Outbound Call
- Transport Outbound BFCP
- Use TLS
- Scheme
• LDAP Servers list
Reconfigure Avaya CU360 using the Quick Setup Wizard to restore the provisioning.
Related links
Viewing the Avaya CU360 endpoint serial number for the Pexip subscription on page 49
Configuring Avaya CU360 automatically for Pexip meetings on page 49
Configuring Avaya CU360 automatically for Pexip meetings using the quick setup on page 50
Activating the Pexip provisioning for Avaya CU360 on page 51
Verifying the Avaya CU360 status for Pexip on page 51
Avaya CU360 overview
October 2022 Installing and Administering Avaya Collaboration Unit CU360 28
Comments on this document? infodev@avaya.com