Avaya CU360 - Android 10 Enhancements

Chapter 3: Initial setup and connectivity
Checklist for setting up Avaya CU360
No. Task Description Notes
1 Set up the Avaya
CU360 hardware.
Connecting Avaya CU360 on
page 34
—
2 Switch on Avaya
CU360.
Switching Avaya CU360 on or
off on page 35
—
3 Pair the Avaya CU360
remote control unit.
Pairing the remote control unit
with Avaya CU360 on page 36
—
4 Configure basic settings Configure the basic settings:
• Automatically: Configuring
Avaya CU360 automatically on
page 45
• Automatically for Avaya
Meetings Server: Configuring
Avaya CU360 automatically
for Avaya Meetings Server on
page 43
• Manually: Configuring Avaya
CU360 manually on page 52
You can use one of the
following interfaces to
configure settings:
• The Avaya CU360
remote control unit.
• The Avaya CU360
web interface
• Avaya Collaboration
Control using iOS
devices
• Avaya Collaboration
Control using Android
devices
Connecting Avaya CU360
About this task
Avaya CU360 contains the following standard equipment:
• Endpoint
• Remote control unit with batteries
• HDMI cable
October 2022 Installing and Administering Avaya Collaboration Unit CU360 34
Comments on this document? infodev@avaya.com