Automatic Setup
Using this option, you can choose between one of the following:
You have a corporate account with an email address
An automatic configuration option to set up Avaya CU360 as a SIP endpoint if you have Avaya
Meetings Server deployed in your enterprise network. The automatic configuration option, which
uses DNS discovery, must be enabled for your
Avaya Meetings Server deployment. Avaya CU360
automatically receives the SIP configuration and other settings from the Avaya Meetings Server
deployment. Enter the credentials of your video endpoint for the configuration.
You have a service code
An automatic configuration option using a service code that you must provision for Avaya CU360.
When you switch on
Avaya CU360 for the first time, it prompts you to enter the service code,
after which the basic settings are automatically configured. Using this option, Avaya CU360 can
be provisioned as an H.323 or SIP endpoint, automatically connected to the enterprise directory,
and can be set up to upgrade automatically.
Pexip Provisioning
An automatic configuration option to connect Avaya CU360 with the Pexip Cloud Service.
Manual Setup
A manual configuration option using the quick setup wizard to configure Avaya CU360 and the
network settings. You can also use this option to modify the existing configuration.
Configuring Avaya CU360 for USB AV bar mode using quick setup
About this task
Configure Avaya CU360 as a USB audio/video bar from the quick setup wizard.
Manually activate the USB AV bar mode from Avaya CU360 after connecting to the laptop or
computer.
Enable the Always Active option if you need to use the Avaya CU360 endpoint only in USB AV Bar
Mode without connecting any monitor.
Procedure
1. Start Avaya CU360.
Avaya CU360 displays the quick setup wizard.
2. From the list, select your preferred language.
3. (Optional) To configure Wi-Fi, click Wi-Fi, and configure your wireless network settings.
4. Click Next.
5. (Optional) To update the new version, click Install.
• Avaya CU360 displays the System updates status.
• When the installation process is completed, Avaya CU360 restarts automatically.
6. Select As USB Audio/Video Bar.
Initial setup and connectivity
October 2022 Installing and Administering Avaya Collaboration Unit CU360 38
Comments on this document? infodev@avaya.com
To Next Page
Loading...
