Avaya CU360 - Chapter 4: Initial administration; Configuring call answering preferences in Avaya CU360

Chapter 4: Initial administration
Configuring call answering preferences in Avaya CU360
Procedure
1. Do one of the following:
• From the endpoint, click Configure > Calling.
• From the web interface, click Basic Settings > Call-Answer mode > General.
2. Configure the following fields:
• Mute
• Volume
• Video Privacy
• Do not Disturb
• DnD Mode
• Automatic Answer
• Answer after (Rings)
• Ringing Volume
• Confirm Disconnect
3. On the web interface, click Save.
October 2022 Installing and Administering Avaya Collaboration Unit CU360 61
Comments on this document? infodev@avaya.com