Connecting USB cameras to Avaya CU360
About this task
You can connect the following USB cameras to the Avaya CU360 endpoint:
• Avaya Huddle Camera HC010
• Avaya Huddle Camera HC020
• Avaya Huddle Camera HC050
• Avaya Room Camera RC100
You can also connect third-party USB cameras to the Avaya CU360 endpoint.
For audio, use the Avaya CU360 endpoint mic when connecting the Avaya CU360 endpoint to a
USB camera. Third-party apps also support the USB camera.
When you enable the control camera option, Avaya CU360 does not support Avaya AV Grabber.
To use Avaya AV Grabber, disable the control camera option and restart the Avaya CU360
endpoint.
Use the USB camera with an excellent video quality and a maximum resolution of 720p@30fps as
an additional live camera in the Avaya CU360 application.
Procedure
1. Do one of the following:
• On the endpoint main menu, click Configure.
• On the web interface, click Basic Settings.
On the endpoint, Avaya CU360 displays the Configure window.
2. On the endpoint, click Advanced.
The default PIN for Advanced settings on the endpoint is 1234.
If your administrator configures a PIN to access the advanced settings on the endpoint,
Avaya CU360 prompts you to enter the PIN. After entering the PIN, Avaya CU360 displays
the Advanced window.
3. Click I/O Connections > Cameras > USB.
4. Configure the following fields:
• Enable: Yes
• Control Camera: Yes
5. On the web interface, click Save.
Connecting USB cameras to Avaya CU360
October 2022 Installing and Administering Avaya Collaboration Unit CU360 93
Comments on this document? infodev@avaya.com
To Next Page
Loading...
