Avaya CU360 - Connecting additional monitor to Avaya CU360

Connecting additional monitor to Avaya CU360
About this task
Configure the Avaya CU360 endpoint to connect an additional monitor using a self-powered
USB-C to HDMI adapter.
Tip:
Use Avaya adapter or third-party USB-C to HDMI powered adapters to connect the additional
monitor.
Always connect the self-powered USB hubs or adapters to prevent unexpected Avaya CU360
turn-off.
Do not disconnect the additional monitor during meetings. Restart the Avaya CU360 endpoint after
connecting or disconnecting the additional monitor.
Avaya CU360
Additional monitor through adapter
Main monitor
Procedure
Connect an additional monitor to the USB-C port of the Avaya CU360 endpoint.
Result
• Avaya CU360 application automatically detects the additional monitor and displays
participants list during the meetings on the additional monitor.
• Other applications display as extra content on the additional monitor or duplicate the content
of the main monitor.
Related links
Avaya CU360 supports additional monitor on page 29
Configuring the monitor settings in Avaya CU360 on page 143
Initial administration
October 2022 Installing and Administering Avaya Collaboration Unit CU360 94
Comments on this document? infodev@avaya.com