Result
• Avaya CU360 displays USB Audio/Video Bar Mode Active message.
• Avaya CU360 automatically rejects incoming calls and changes to the Do not disturb mode.
• Avaya CU360 silences calendar meeting notifications.
Next steps
• You can configure the Avaya CU360 microphone and camera as a USB resource from Audio
& Video Settings on the computer.
• Use the Avaya CU360 remote control to control the pan, tilt, and zoom option and the
speaker tracking option.
• Use computer volume control or video-calling application volume control to mute Avaya
CU360.
Related links
Avaya USB AV bar on page 30
Connecting the Avaya CU360 endpoint to the computer as
a USB AV bar
About this task
Connect the Avaya CU360 endpoint to the computer using a USB 3.0 cable to activate the USB
AV bar mode.
The computer supports the following operating system to use the USB AV bar mode:
• Computer running Windows 10 or later
• Computer running macOS 10.12 or later
Note:
Use Type-A cable for the computer running macOS to use the USB AV bar mode
Do not connect a USB extra camera or other USB devices on Avaya CU360 if you plan to use the
Avaya CU360 endpoint as USB camera.
If you need a USB cable longer than 2.7 meters (8.8 ft), use an active USB booster extension
cable to connect the Avaya CU360 endpoint.
Initial administration
October 2022 Installing and Administering Avaya Collaboration Unit CU360 96
Comments on this document? infodev@avaya.com
To Next Page
Loading...
