Result
• Avaya CU360 displays USB Audio/Video Bar Mode Active message.
• Avaya CU360 displays rotating LEDs that become green on the endpoint.
• Avaya CU360 automatically rejects incoming calls and changes to the Do not disturb mode.
• Avaya CU360 silences calendar meeting notifications.
Next steps
• You can configure the Avaya CU360 microphone and camera as a USB resource from Audio
& Video Settings on the computer.
• Use the Avaya CU360 remote control to control the pan, tilt, and zoom option and the
speaker tracking option.
• Use computer volume control or video-calling application volume control to mute Avaya
CU360.
Related links
Avaya USB AV bar on page 30
Enabling the Avaya IP camera
About this task
You can configure Avaya CU360 to enable an IP camera. The IP camera does not support audio.
Procedure
1. Do one of the following:
• On the endpoint main menu, click Configure.
• On the web interface, click Administrator Settings.
2. On the endpoint, click Advanced.
The default PIN for Advanced settings on the endpoint is 1234.
If your administrator configures a PIN to access the advanced settings on the endpoint,
Avaya CU360 prompts you to enter the PIN. After entering the PIN, Avaya CU360 displays
the Advanced window.
3. Click I/O Connections > Cameras > IP.
4. Configure the following fields:
• Enable: Select Yes to enable the IP camera.
• URL: The format of the URL depends on the IP camera model.
For example: rtsp://[username:password@]ip_address[:port]/filename
- rtsp://192.168.1.66:8080/h264_pcm.sdp
Enabling the Avaya IP camera
October 2022 Installing and Administering Avaya Collaboration Unit CU360 99
Comments on this document? infodev@avaya.com
To Next Page
Loading...
