6 Quick Start for Hardware Migration: S8400 Media Server in a CMC1 or G600 Media Gateway
2a Administering the Existing System (CSI)
For complete information on performing these tasks, see Migrating to an Avaya S8400 Media Server in
Upgrading, Migrating and Converting Media Servers and Gateways, 03-300412.
Task Command
Connect to the processor 1. 192.11.13.6
Remove the Netcon
data modules
1. list data module
2. list user ext user
3. change hunt-group hunt group number
4. remove data-module extension
Verify the system status 1. list configuration all
2. list trunk-group
3. list hunt-group
Record all busyouts 1. display errors
Note the node names
and IP addresses
1. display ip-interfaces
2. list node-names
Save the translations 1. save translation
To Next Page
Loading...
