Avaya H.323 9608 - Local Administrative Craft Procedures Menu

character. If the entry is a hex character (A-F) or a fourth character is entered in the field, the
telephone accepts the input is IPv6 format. Otherwise, the telephone makes the initial validity
check when you enter a field boundary, a colon or decimal point. This initial typographic
character determines whether the overall address must be in IPv4 format with a decimal point
or in IPv6 format with a colon. Once this character is entered, the telephone examines the
contents of the first field to ensure consistency with the field boundary. That is the absence of
hex characters, and at most three characters of value 255 or less, in the first field if the field
boundary is a decimal point. If the first field contains any content inappropriate for the entered
field boundary, an error beep is generated. You cannot enter more content until the
contradiction in the text string is deleted, meaning either the field boundary is deleted or the
cursor is moved back and the field contents edited). After you enter content that identifies the
format of the IP address appropriate to IPv4 or IPv6, the rest of the address entry conforms to
that format.
Local administrative Craft procedures menu
Using the administrative procedures, you can customize the IP deskphone installation for your
specific operating environment. This section provides a description of each local administrative
option covered in this guide, with references to the pages on which the option appears.
Note:
For touch screen-based deskphones, simply touching a line or a softkey produces the same
result as selecting a line or a softkey on non-touchscreen or button-based IP deskphones.
Depending upon the privileges assigned to the user by administrator, an end user can view
but cannot change most of the parameters associated with Craft procedures. For more
information, see the applicable user guides.
Administrativ
e Procedure
value (in
English)
Purpose See
8021X Set 802.1X operational mode Setting the Operational Mode to
802.1X on page 45.
ADDR Address information
programming
Using The pre-installation checklist on
page 46 and Changing IP address
information on page 47.
AGC Enable/disable Automatic Gain
Control
Disabling/enabling automatic gain
control on page 50.
CALIBRATE
SCREEN
Calibrate the touch screen Calibrating The Touch Screen on
page 49.
Local administrative Craft procedures menu
Installing and maintaining Avaya IP Deskphone H.323 9608, 9608G, 9611G, 9621G, and 9641GJanuary 2014 43