Avaya IP Office IP500 V2 - Memory Card Startup; Starting up a Memory Card Using Manager; Starting up a Memory Card Using System Status

Memory card startup
Reinserting a memory card into a system that is already switched on will automatically restart card
operation. However, if the card has been shutdown but not removed, it can be restarted without
requiring a reboot.
Related links
Installing Embedded Voicemail on page 13
Starting up a memory card using Manager on page 19
Starting up a memory card using System Status on page 19
Starting up a memory card using Manager
About this task
Use this task to restart a memory card without removing and reinserting it.
Procedure
1. In IP Office Manager, select File > Advanced > Memory Card Command > Startup.
2. Select the system and enter an administrator name and password.
3. Select System.
4. Click OK.
Related links
Memory card startup on page 19
Starting up a memory card using System Status
About this task
Use this task to restart a memory card without removing and reinserting it.
Procedure
1. Open System Status and access the status output.
2. In the navigation pane, select System > Memory Cards.
3. Click System SD or Optional SD.
4. At the bottom of the window, click Startup.
Related links
Memory card startup on page 19
Memory card startup
September 2020 Embedded Voicemail Installation 19
Comments on this document? infodev@avaya.com