IP500/IP500 V2 Installation Page 106
15-601042 Issue 25i (03 January 2013)IP Office 8.0
5.4 Changing the Default Passwords
You should change the default passwords used for configuration access to the IP Office system. Failure to do this leaves
the system insecure to unauthorized configuration changes.
Changing the Security Settings
1.
Start IP Office Manager and receive the configuration from the IP Office system.
2.
Select File | Advanced | Security Settings.
3.
Enter a user name and password of an account that has security configuration access to the IP Office system. The
defaults (which should be changed as part of this process) are security and securitypwd.
4.
Click on System and select the Unsecured Interfaces tab.
· The System Password is used by Manager for remote software upgraded of the IP Office system. The default
password is Administrator. Click on the Change button and enter a new password. Click OK.
· Click OK.
5.
Click on Service Users. The list will show the service user accounts that exist to access the IP Office
configuration.
6.
The default service users Administrator, Manager and Operator each use the same value (Administrator,
Manager and Operator) as their password. For each of these service users:
· Click on the service user name. In the Service User Details tab, click on Change and enter a new password.
Click OK.
· Click OK.
68
To Next Page
Loading...
