IP500/IP500 V2 Installation Page 111
15-601042 Issue 25i (03 January 2013)IP Office 8.0
Initial Configuration Using IP Office Manager: Disable Unused Trunks
· T1, T1 PRI and E1R2 Trunks
To disable the whole trunk, on the main form set the Admin option to Out of Service. Otherwise select the
Channels tab and set those channels that are not used to Out of Service.
· For T1 set the Type to Out of Service.
· For T1 PRI set the Admin field to Out of Service.
· For E1R2 trunks set the Line Signalling Type to Out of Service.
To Next Page
Loading...
