Avaya IP500 V2 - Memory Card Reinsertion

IP500/IP500 V2 Installation Page 123
15-601042 Issue 25i (03 January 2013)IP Office 8.0
Additional Processes: Memory Card Removal
6.4 Memory Card Reinsertion
Reinserting a memory card into a system that is already switched on will automatically restart card operation. However, if
the card has been shutdown but not removed, it can be restarted using Manager without requiring a reboot.
Card Startup Using IP Office Manager
1.
Using IP Office Manager, select File | Advanced | Memory Card Commands | Startup.
2.
Using the Select IP Office menu, select the IP Office system containing the memory card.
3.
Click OK.
Card Startup Using the System Status Application
1.
Start System Status and access the IP Office's status output.
2.
In the navigation panel select System.
3.
Select Memory Cards.
4.
Select either System Card or Optional Card.
5.
At the bottom of the screen select Start Up.
Card Startup Using a System Phone
This process can be used by a user configured as a System Phone user and using a 1400, 1600, 2400, 4600, 5400, 5600
or 9600 Series phone (excluding XX01, XX02 and XX03 models). The user's Login Code is used to restrict access to
system administration functions on the phone.
1.
Select Features | Phone User | System Admin.
2.
Enter your IP Office user login code.
3.
From the menu select Memory Card.
4.
Select System for the System SD card or Option for the Optional SD card.
5.
Select Startup.
69