IP500/IP500 V2 Installation Page 166
15-601042 Issue 25i (03 January 2013)IP Office 8.0
7.4.4.2 Restoring Software from an Optional SD Card
These processes copy all files in the folder except the configuration file (config.cfg) and licenses file (keys.txt). The
processes take approximately 5 minutes. These process do not restore Embedded Voicemail prompts (see Upgrading Card
Software ).
· ! IP Office Technical Bulletins
Ensure that you have obtained and read the IP Office Technical Bulletin relating to the IP Office software release
which you are installing. This bulletin will contain important information that may not have been included in this
manual. IP Office Technical Bulletins are available from the Avaya support website (http://support.avaya.com).
· ! Upgrade Licenses
Some upgrades may require entry of upgrade licenses. It is still possible to upgrade the system without the
necessary licenses, however the system will not provide any telephony functions after the upgrade until the
appropriate license is added to the system configuration.
· ! WARNING
This process will require the IP Office system to reboot in order to complete the process. Any current calls and
services will be ended by the reboot.
Copying Software Files from the Optional SD Card Using IP Office Manager
1.
Using IP Office Manager, select File | Embedded File Management.
2.
Using the Select IP Office menu, select the IP Office system.
3.
The file contents of the memory cards are displayed.
4.
Select File | Upgrade Binaries.
· The software files (all files in the folder except the configuration file (config.cfg) and licenses file (keys.txt))
in the /primary folder on the Optional SD card are copied to the /primary folder on the System SD card. This
process takes approximately 5 minutes.
· When the process has been completed, the IP Office system will be restarted.
Copying Software Files from the Optional SD Card Using a System Phone
This process can be used by a user configured as a System Phone user and using a 1400, 1600, 2400, 4600, 5400, 5600
or 9600 Series phone (excluding XX01, XX02 and XX03 models). The user's Login Code is used to restrict access to
system administration functions on the phone.
1.
Select Features | Phone User | System Admin.
2.
Enter your IP Office user login code.
3.
From the menu select Memory Card.
4.
Select Upgrade Binaries....
· The software files (all files in the folder except the configuration file (config.cfg) and licenses file (keys.txt))
in the /primary folder on the Optional SD card are copied to the /primary folder on the System SD card. This
process takes approximately 5 minutes.
· When the process has been completed, the IP Office system will be restarted.
167
To Next Page
Loading...
