IP500/IP500 V2 Installation Page 173
15-601042 Issue 25i (03 January 2013)IP Office 8.0
SD Card Management: Removing SD Cards
System Shutdown Using a System Phone
This process can be used by a user configured as a System Phone user and using a 1400, 1600, 2400, 4600, 5400,
5600, 9500 or 9600 Series phone (excluding XX01, XX02 and XX03 models). The user's Login Code is used to restrict
access to system administration functions on the phone.
Unlike Manager, a system phone user cannot select an indefinite shutdown. They can set a timed shut down of between 5
minutes and 24 hours.
1.
Select Features | Phone User | System Admin.
2.
Enter your IP Office user login code.
3.
From the menu select System Shutdown.
4.
Select a time period for the shutdown. It must be in between 5 minutes and 24 hours.
5.
Press Done and then Confirm to begin the shutdown.
System Shutdown Using the IP500 V2 AUX Button
When the AUX button is pressed for more than 5 seconds, the IP500 V2 control unit will shutdown with the restart timer
set to 10 minutes.
To Next Page
Loading...
