IP500/IP500 V2 Installation Page 19
15-601042 Issue 25i (03 January 2013)IP Office 8.0
System Overview: IP500 V2 System Components
1.4 IP500 Office System Components
This page set to appear in standard mode only.
The following are the typical components of an IP Office system based on an IP500 control unit.
· IP Office IP500 Control Unit
The control unit holds the main configuration and performs the
routing and switching for telephone calls and data traffic. Each
control unit includes 4 slots for optional base cards to support
trunk and phone extension ports.
· Feature Key Dongle
This uniquely numbered dongle is used to validate license
keys entered into the system's configuration to enable
features. For IP500 control units, a dongle is mandatory for
correct system operation even if no licensed features are
being used. IP500 control units use a Smart Card which is
slotted into the rear of the control unit.
· IP500 Base Cards
The IP500 control unit has slots for up to 4 IP500 base cards.
These can be used to add ports for analog extensions, digital
extensions, voice compression channels and other resources.
· IP500 Digital Station Base Card
· IP500 Analog Phone Base Card
· IP500 VCM Base Card
· IP500 Legacy Card Carrier
· IP500 4-Port Expansion Base Card
· IP500 Trunk Daughter Cards
Many of the IP500 base cards can be fitted with an IP500 daughter
card in order to support various types of trunk connections.
· IP500 Analog Trunk Card
· IP500 BRI Trunk Card
· IP500 PRI Trunk Card
· IP400 Cards
The IP500 Legacy Carrier base card can be used to allow IP400
trunk cards and IP400 VCM cards to be added to the IP500 control
unit.
VK00nDd15SDvXoxkw9cR9x_jOXr_AWz9
· License Keys
Various IP Office features and applications require a license key to
be entered into the system's configuration. Each key is a 32-
character text string unique to the feature being activated and the
serial number of the Feature Key dongle installed in the system.
· IP500 External Expansion Modules
Additional ports can be added using a number of IP500 external
expansion modules. Support also includes IP400 external
expansion modules . Up to 8 external expansion modules are
supported or 12 if the control unit is fitted with an IP500 4-Port
Expansion Base Card.
16
43
21
216
211
220
218
210
24
223
224
225
25
405
27
32
To Next Page
Loading...
