IP500/IP500 V2 Installation Page 237
15-601042 Issue 25i (03 January 2013)IP Office 8.0
System Components: IP500 Expansion Modules
9.5.5 Phone
IP500 Phone modules can be used to add additional PHONE ports to an IP Office system.
The module is available in 16 and 30 port variants, referred to as the IP500 Phone 16 and IP500 Phone 30 respectively.
Supported in all IP Office locales .
IP Office core software level 2.1(36) minimum. Bin file = dvpots.bin.
Power supply unit (see below) and Expansion Interconnect cable.
The module is supplied with a Earthed 3-Pin, 60W external power supply unit. The PSU has an
integral power cord for connection to the module's DC I/P socket. A locale specific IEC60320 C13
power cord for the external PSU is required but is not supplied with the module.
The module is designed as a free-standing module that can be stacked on or under other IP Office
modules. The module can be rack mounted in a 19" rack system using the optional IPO IP500
RACK MNTG KIT. It can be wall mounted using the IPO IP500 RACK MNTG KIT V2.
Width: 445mm/17.5". Depth: 245mm/9.7". Height: 71mm/2.8".
Unboxed: 3.1Kg/6.94lbs. Boxed: 4.4Kg/9.7lbs. (Based on Phone 30 V2)
48
34
To Next Page
Loading...
