Avaya IP500 V2 - Digital Station

IP500/IP500 V2 Installation Page 255
15-601042 Issue 25i (03 January 2013)IP Office 8.0
System Components: IP400 Expansion Modules
9.9.3 Digital Station
The IP400 Digital Station module (also known as DS module) is used to add additional DS ports to an IP Office system.
The DS module is available in 16 and 30 port variants, referred to as DS16 and DS30 modules respectively. The IP400
Digital Station Module has been superseded by the IP400 Digital Station Module V2 .
Feature
Details
Supported on
All IP Office control units except Small Office Edition.
Locales
Supported in all IP Office locales .
Software Level
IP Office core software level 1.0 minimum. Bin file = nadcp-16.bin.
Included
Power supply unit (see below) and Expansion Interconnect cable.
Power Supply
The module is supplied with a 2-pin, 40W external power supply unit. The PSU has an integral
power cord for connection to the module's DC I/P socket. A locale specific IEC60320 C7 power cord
for the external PSU is required but is not supplied with the module.
Mounting
The module is designed as a free-standing module that can be stacked on or under other IP Office
modules. The module can be rack mounted in a 19" rack system using the optional IP400 Rack
Mounting Kit.
Dimensions
Width: 445mm/17.5". Depth: 245mm/9.7". Height: 71mm/2.8"/2U.
Weight
Unboxed: 3.5Kg/7.8lbs. Boxed: 4.8Kg/10.8lbs. (Based on DS30).
253
48
34