IP500/IP500 V2 Installation Page 264
15-601042 Issue 25i (03 January 2013)IP Office 8.0
9.10.2 IP500 Rack Mounting Kit
· IPO IP500 RACK MNTG KIT (SAP 700429202)
This kit contains all the components required for the rack mounting of
a single IP500 V2 control unit, IP500 control unit or IP500 external
expansion module. This includes screws for fixing of the brackets to
the module, bolts for securing the module in the rack and cable tidy
brackets.
9.10.3 IP400 Rack Mounting Kit
· IP400 Rack Mounting Kit (SAP 700210800)
This kit contains all the components required for the rack mounting of
a single control unit or expansion module. This includes screws for
fixing of the brackets to the module and bolts for securing the module
in the rack.
9.10.4 Barrier Box Rack Mounting Kit
· Barrier Box Rack Mounting Kit (SAP 700293905)
Barrier boxes must be used for out-of-building analog phone
extensions . This bracket allows up to 8 IP Office barrier boxes to
be rack mounted and simplifies the number of connections to the
protective ground point in the rack. This kit must be used when more
than 3 barrier boxes are in use and supports a maximum of 16
barrier boxes for a single external expansion module.
40
To Next Page
Loading...
