Avaya IP500 V2 - LAN Port

IP500/IP500 V2 Installation Page 385
15-601042 Issue 25i (03 January 2013)IP Office 8.0
System Components: Physical Ports
9.16.13 LAN Port
These ports are found on IP Office control units. They are used for connection to IP LANs and IP devices.
All IP Office LAN ports are 10/100Mbps auto-sensing. Operation varies as follows:
· IP Office 500 / IP500 V2
The ports are full-duplex 10/100Mbps auto-sensing, MDI crossover ports. They form a managed layer 3 Ethernet
switch. The WAN port is not supported on systems running in IP Office Basic Edition - PARTNER® Mode, IP Office
Basic Edition - Norstar Mode or IP Office Basic Edition - Quick Modes.
The LEDs are used as follows:
· Green: On = connected, Flashing = Activity.
· Yellow: On = 100Mbps, Off = 10Mbps.
LAN Cables
These are CAT5 UTP cables for connection of various IP devices within the IP Office system.
IP Office
LAN
Pin
MDIX
(Normal)
MDI
(Crossover)
Wire
Standard/
Interconnect
Crossover
1
Rx-A.
Tx-A.
White/Orange
1
3
2
Rx-B.
Tx-B.
Orange/White
2
6
3
Tx-A.
Rx-A.
White/Green
3
1
4
Not used.
Not used.
Blue/White
4
4
5
Not used.
Not used.
White/Blue
5
5
6
Tx-B.
Rx-B.
Green/White
6
2
7
Not used.
Not used.
White/Brown
7
7
8
Not used.
Not used.
Brown/White
8
8
· SAP Code:
· LAN Cable - GREY: 700213481.
Standard straight LAN cable.
· LAN Crossover Cable - Black: 700213473.
LAN crossover cable.