Avaya IP500 V2 - Adding a License File; Adding a 9600 Series Screen Saver File; Adding Music on Hold Files

IP500/IP500 V2 Installation Page 79
15-601042 Issue 25i (03 January 2013)IP Office 8.0
IP500 V2 Installation: SD Card Preparation
4.4.4 Adding a License File
For IP500v2 control units, if a licence file called keys.txt is found in the SD card folder which the IP Office uses when it
boots, the IP Office will merge the licenses in that file with its configuration.
The files should be a plain text file (UTF8) containing either:
· A license name and license key separated by a
comma on each line.
Teleworker, uAuToY@9VvVV@VOzIgeegwLXL2sAs1Z5
Mobile Worker, NvWO_iVY5KJpZMNeY89IB1sIj0_QUCDm
Power User, 9IJQW3yuPsbxjGS2XcMa16_J9H8cSeZ9
System Advanced, JAWZaw@YtK37vcnXkqM4mDYDIdSMd9_1
· A license key on each line.
uAuToY@9VvVV@VOzIgeegwLXL2sAs1Z5
NvWO_iVY5KJpZMNeY89IB1sIj0_QUCDm
9IJQW3yuPsbxjGS2XcMa16_J9H8cSeZ9
JAWZaw@YtK37vcnXkqM4mDYDIdSMd9_1
1.
Using a card reader, copy the file into the /system/primary folder on the System SD memory card.
4.4.5 Adding a 9600 Series Screen Saver File
When idle, 9600 Series phones can timeout to displaying a screen saver image. A file, 96xxiposs.jpg, is present on the
cards by default.
You can replace this file with your own branded file. The file should be smaller than the screen size on 9600 Series phones
in order to then be moved around the screen.
Phone
Maximum Size
Phone
Maximum Size
Phone
Maximum Size
9620
232 x 69
9621G
350 x 153
9641G
480 x 272
9620L
232 x 69
9630
232 x 140
9650
232 x 140
9620C
232 x 69
9640
232 x 140
9650C
232 x 140
· Color Displays: Color depth is 16 bit. A separate color image will look best.
· Non-Color Displays: Best results are achieved with a single grayscale logo image. 2 levels of grayscale are also
supported.
· To invoke transparent backgrounds with logos, use a background color of 0,255,0 (brightest possible green).
4.4.6 Adding Music on Hold Files
By default the IP Office will use internal music on hold by uploading a music file from the IP Office Manager PC. For
IP500v2 systems, you can load a file onto the System SD card prior to installing it in the IP Office.
The file must be of the following format and must be called holdmusic.wav.
Property
Value
File Type
WAV
Bit Rate
128kbps
Audio sample size
16 bit
Channels
1 (mono)
Audio Sample Rate
8 kHz
Audio Format
PCM
Length
Up to 90 seconds.
1.
Rename the music file holdmusic.wav.
2.
Using a card reader, copy the file into the /system/primary folder on the System SD memory card.
3.
If the IP Office is or will be configured for additional hold music files (up to 3 additional files), copy those files to the
same location. The name of the additional files must match those specified in the IP Office system's configuration.